academyleft.blogg.se - Saffire mixcontrol program

Saffire mixcontrol program software#

Channel name - This is the name of the channel.

Mute button - This Mutes the selected channel in the mix.

Solo button - This Solos the selected channel in the mix.

PFL button - This routes only the selected channel to the monitor outputs until it is pushed again.

Level meter - From left to right: Gain applied by fader (dB) Maximum level (dBFS) Current level (dBFS).

Channel Mono/stereo toggle switch - This will switch the channel between one stereo channel and two stereo channels.

To remedy this, lower the gain and click on the red bar. If the signal has clipped it will display a red bar at the top of the meter. This can be a useful way to monitor the input signal. Graphic meter - This displays the level of the signal in dBFS before the fader.Fader - The controls the level of the signal in that particular mix.Double-clicking on this control will centre the control and send an equal amount of the signal to the left and right channels. Pan control - This controls the amount of the signal sent to the left and right channels of the mix.This can be a physical input or a DAW output and can be changed by clicking on the current input name. Mixer channel input - This controls the input for the respective input channel.

Each mixer channel consists of the following.

Saffire mixcontrol program software#

This tutorial will explain the features and settings of MixControl to allow the greatest amount of control over your interface.Įach mix allows analogue and digital inputs to be blended together with software outputs before being routed to a physical output. Scarlett Mix Control is the control software that is used to control the output routing and settings for the Scarlett interface range. Saffire MixControl is the control software that is used to control the output routing and settings for the Saffire interface range.